_TaskName:SchemEd

# Warnings/Errors that can be generated by the user
NotMultiple:You cannot run two copies of SchemEd at once.
SLERunning:The Symbol Editor is already running as a stand-alone application.
EmptyLibs:Warning - Empty Symbol Libraries.
NoSuper:Can't superimpose copies on originals.
HowToCopy:To create a copy, drag selection with <Shift> key pressed.
UnsavedWork:Warning - File "%0" contains unsaved work.
|BSBusy:Warning - Simulation of "%0" currently in progress.
NoEditSubs:Individual subsymbols cannot be %0. You must select all subsymbols in a component to %1 it.
NoCopySymTxt:Symbol text cannot be copied - you can only copy complete symbols. General text can be added using the Text Placement tool.
NoDelSymTxt:Symbol text cannot be deleted.
NoSaveSymTxt:Symbol text '%0' cannot be saved - the parent symbol '%1' must be saved.
BadPrintFile:Requested destination for printout data is invalid.
Exists:An object '%0' already exists. Choose OK to overwrite it (if a file) or Cancel to abort printing. Directories cannot be overwritten.
Floating:(%0) Floating %1 at (%2).
NoErrs:All errors in current schematic have now been resolved.
SymErr:Symbol '%0 : %1' contains errors that can only be resolved using the Symbol Editor.
NoNearbyPin:No nearby floating pin for No-Connect text.
HasNC:Component Pin already has an associated No-Connect text object.
NCTooFar:No-Connect text object '%0' has been moved too far from its parent pin.
NoSaveNC:No-Connect text '%0' cannot be saved - the parent symbol '%1' must be saved.
HasNR:This Net already has an associated Net Ref text object. Edit the existing one or delete it and place a new one.
NoNearbyNet:No nearby Net for Net Ref text.
NRTooFar:Net Ref text object '%0' has been moved too far from its parent net.
NoCopyNetRefs:Warning - Net Refs cannot be copied. Press OK to complete the copy, with the usage(s) modified to 'Comment', or press Cancel to skip copying all selected Net Refs.
NoDesigOrder:Error - Designator family '%0' not found in Designator Ordering specification.

# Print dialogue title when driver not found
NoPDrv:No Printer Driver loaded

# Messages that signal a program malfunction of some kind
NoApp:Error - %0 application missing or broken. Open a directory display containing the !%0 application and try again.
NoRead:Error - Can't read file '%0'
NoWrite:Error - Can't write file '%0'
NoOpenLib:Error - Can't open Symbol Library file '%0'
NotValidLib:'%0' is not a valid Symbol Library file. You may need to run LibUpdate if you have recently upgraded your copy of SchemEd.
BadFontData:Error - Invalid or corrupt FontData file '%0'
NoChars:FontData file is empty. Create a character set using the !FontEdit application.
BadHdr:Invalid file header '%0'. Check SchemEd ProgInfo dialogue version no. is equal to or later than that shown above. If not, you need to update your copy of SchemEd.
Corrupt:Serious error - %0 data corruption has been detected. SchemEd will Undo this operation.
#NoPCB:PCB component libraries not found. Open a Filer window containing the RiscPCB application and try again.
NoParentPin:Error - Cannot locate parent pin for reference text '%0'. You will need to delete and replace the parent symbol.
PcbLibDir:<pcb$Dir>.Librarys
PLDOdflt:R,VR,C,L,D,V,Q,TR,J,IC,U,Y,K,RL,S,SW,T,TX,E,LK,TP,B
NoSimGnd:No simulation ground node specified - netlist creation aborted.
BadNodeItem:Invalid node list entry '%0'.
SpiceTitle:Spice netlist produced by SchemEd A.06
BadPinTxt:Can't find mandatory pin ref '%0' on symbol '%1'.
BadFreqs:End Frequency must be higher than Start Frequency.
NotZero:You must specify a finite number %0.

#Simulation-related Messages

NoBS:The !BSpice3f4 application has not been seen by the Filer.

NoBSBoot:SchemEd could not install !Boot file for BSpice3f4.

BootCopied:SchemEd has successfully installed a !Boot file into BSpice3f4.

BSRunning:!BSpice3f4 is already running as a stand-alone application.

BSNoRun:The !BSpice3f4 Front End could not be started.

BSNoReg:Timed out waiting for !BSpice3f4 Front End to register with Wimp.

BSNoQuit:Timed out waiting for !BSpice3f4 Front End to quit.

BSNoHandle:No BSpice3f4 task handle.

BSNoData:Timed out waiting for !BSpice3f4 to create output.

NoRawFile:No output data file was produced.

BSNoLog:Failed to open Logfile - operation timed out.

BSBusy:There is a BSpice analysis in progress. You must abort the analysis or wait for it to finish before you can quit !SchemEd.

HasErrs:Circuit has errors. Click 'OK' to show error listing.

